The Roto-Max electric hydraulic work positioner places the load where the operator would like the work load positioned allowing complete flexibility to do the ergonomically safest job with maximum efficiency.
Whether the load is one pound or 3,500 pounds, the positioner height does not change until the individual wants it to change. With a lowered height of only 6.5", the operator has easy access to the top layer of product. The raised height of 32.5" (plus pallet height) is ideally suited for most applications.
The 43" diameter top rotates easily, thus giving the operator access to product without having to stretch or walk around. The high performance electric 1.5 hp motor runs on a standard 20 amp 115 volt single phase circuit.
The 43" diameter top rotates easily, thus giving the operator access to product without having to stretch or walk around. The high performance electric 1.5 hp motor runs on a standard 20 amp 115 volt single phase circuit.
On camroller and pivot points. Regreasable. Lasts longer than lifetime lubricated bearings. Easily serviced.
Intermittent duty. Able to be run for 15 minutes of every hour. Suitable for medium and high cycle applications.
Captured 'Lift-Lok' secures top and base leg rollers and allows for easy maintenance access when lowered.
Extends cylinder life by reducing friction and wear. Faster stroke speeds than rubber. High chemical resistance.
| Base Model | Vertical Travel | Capacity | Height | Platform Size | Up Speed | Base Frame | Motor | Voltage | Quote Form | |
|---|---|---|---|---|---|---|---|---|---|---|
| Lower | Upper | |||||||||
| RTMX-25HS | 26" | 2,500 lbs | 6.5" | 32.5" | 43" Dia. | 10 sec | 30" x 45" | 1.5HP | 115 | Quote |
| RTMX-30 | 26" | 3,000 lbs | 6.5" | 32.5" | 43" Dia. | 14 sec | 30" x 45" | 1.5HP | 115 | Quote |
| RTMX-35 | 26" | 3,500 lbs | 6.5" | 32.5" | 43" Dia. | 19 sec | 30" x 45" | 2HP | 230/460 | Quote |
| Model | RTMX-25HS | RTMX-30 | RTMX-35 |
|---|---|---|---|
| Travel | 26" | 26" | 26" |
| Cap. | 2,500 lbs | 3,000 lbs | 3,500 lbs |
| Down | 6.5" | 6.5" | 6.5" |
| Up | 32.5" | 32.5" | 32.5" |
| Top | 43" Dia. | 43" Dia. | 43" Dia. |
| Speed | 10 sec | 14 sec | 19 sec |
| Base | 30"x45" | 30"x45" | 30"x45" |
| Motor | 1.5HP | 1.5HP | 2HP |
| Voltage | 115 | 115 | 230/460 |
| Form | Quote | Quote | Quote |
